The Metro Map Modeler describes processes as metro maps. Each process is a coloured line, and each step is a station. Where two processes share a step, their lines meet at an interchange, so you can see at a glance where processes depend on the same work, the same team or the same system. A line can loop, so a process that never really finishes is shown as it runs.
This guide covers every part of the tool. The same guide is in the app, under Map → Help in the editor and the User Guide link at the top of the Maps screen, next to a sample map you can load and a getting-started guide that walks you through a first map.
On this page
What the tool is for
A metro map shows your processes the way a transit map shows train lines. It is most often used for high-level processes, where each station on a line is a more detailed sub-process in its own right. Each step can carry its own details (who owns it, how long it takes, what it costs, the applications and capabilities it uses) for when the conversation needs them.
It is a description for talking with people, not a process-modelling notation: there are no swimlanes, gateways or events, and nothing runs. A branch means the process can go either way, or both, without saying which.
Key ideas
- Map
- Its lines, stations, tracks, zones, key and settings. You share a map as a whole.
- Line
- One process: a name, a short code (required, up to 4 characters, shown at the ends of the line unless you turn it off; new lines get one from their name, which you can change), a colour and a flow direction.
- Station
- One step. A station belongs to the map, not to a line, so a step several lines stop at is one shared step.
- Interchange
- A station two or more lines stop at.
- Interchange link
- Two separate stations you can change between, shown as their circles joined by a short bar. Each keeps its own name and details.
- Track
- The stretch of a line from one stop to the next. Lines can branch and merge, and where several run along the same route they are shown side by side.
- Zone
- A shaded, named area behind the map: a phase, a department or a system.
- Key
- The legend. It lists every line, and you can show or hide each line from it.
Getting started
Sign in at metro.useful-ea.com with your Useful EA account. The Maps screen lists the maps you own and the ones shared with you, and has four ways to begin:
- Load sample map makes a copy of “Order to cash and friends”, five made-up processes of a small trading company, in three zones. It is yours to change or delete. Loading it again makes another copy.
- New map starts an empty map: give it a name, then add lines and stations.
- New map from a process asks for the map’s name, then opens the process wizard (see A line from a process).
- Import CSV makes a map from a spreadsheet of steps (see CSV).
The getting-started guide in the bottom corner of the app walks through a first map. If you closed it, bring it back from the button at the top of the in-app User Guide.
A line from a process
Add a process line in the editor’s toolbar (the button showing a list becoming a line), or New map from a process on Maps, opens a window where you type a process’s steps, one per line. A list pasted from a document or spreadsheet works too. Blank lines are ignored and names are trimmed.
- Name the line (required). Its colour starts as the next unused colour; change it with the palette or a hex value, as in the line panel.
- A step with the same name as a station already on the map (ignoring case and extra spaces) is that station: the new line runs through it and it becomes an interchange.
- If the first and last steps are the same, the line is a closed loop, shown as a racetrack.
- The line under the box says how many steps are new, which stations will be shared and whether it is a loop. Add is turned off, with the reason, when there are fewer than two steps, a step repeats (other than first and last), the line’s name is already used, or a name matches two stations on the map.
- New stations are placed for you; stations already on the map never move. Each line added is one undo step.
- After Add, choose Add another line or Done. Ctrl+Enter adds the line, and Esc closes the window (it asks first if you have typed steps). A click outside the window doesn’t close it.
Building a map
The toolbar’s buttons are icons: point at one, or move to it with Tab, to see its name and its shortcut. The current tool is shown pressed. The Map menu at the right of the toolbar holds Import CSV, Export, Print, Share, Settings and Help.
The editing tools (editors only):
- Select (the arrow): click a station, track, line or zone to see and change it in the side panel. Drag a box, or Shift-click, to select several stations. Drag a station that isn’t on any line over a track and the track lights up: let go there and the station joins that line, between the track’s two stops. To take a station off one line but keep it on the map, select it: the side panel lists the lines it’s on, each with a Remove button. The line then joins the stops either side of it (or just gets shorter, at an end), and the station keeps its name, details and links. A loop stays a loop while it has three stations or more. If the line would be left with only one station, you’re asked first, and the line is deleted.
- Add station (a circle with a plus): click a free point on the grid. With a track selected, it puts a new station in the middle of that track instead, on that track’s line.
- Draw line (the pen): choose a line (or New line), then click stations or empty grid points in order; each click adds a stop and a track from the one before. Esc ends the line, and keeps everything you clicked. Starting from a stop the line already has makes a branch; ending on one makes a merge, or closes a loop. Starting from a station the line doesn’t stop at, or from a stop on a loop (a loop doesn’t branch), starts a new line there, and that station becomes an interchange.
- Add waypoint (a track bending at a square): click a track to add a point its route must pass through. Double-clicking a track with Select does the same.
- Zone (a dashed square with a plus): drag on the grid to add a zone, or click for one of the default size.
Tracks are routed for you, along horizontals, verticals and 45° diagonals, around stations they don’t stop at. Each track takes the simplest route between its two stations, and a line never turns by more than 45°, not even at a station: where it has to change direction sharply it swings round in a smooth curve instead. If you move a station somewhere with no room for that curve, it stays where it was and the hint bar says why. Drag a track’s bend handle or waypoints to route it yourself; Reset to automatic in the track’s panel undoes that, and Reset line to automatic in the toolbar (a circular arrow beside a line) does it for every track of the selected line at once (one undo step), which straightens out a line twisted by old bends. The button works once a line or one of its tracks is selected: click any track of the line, or the line’s name in a station’s panel. Where lines run along the same route they are shown side by side; the swap control on such a stretch changes their order.
Moving and renaming stations
Drag stations to move them, or nudge the selection one grid point with the arrow keys. Only the tracks to and from a moved station are redrawn; other lines stay exactly where they were, unless the station lands on one of their tracks (the track then goes round it). The moved station’s own tracks take the simplest route from the station before it, through it, to the next. A track kept in place this way becomes a manual route, so Reset to automatic (or Reset line to automatic) lets it re-route. Double-click a station’s label to turn it by 45°. With one station selected, Enter or F2 renames it.
If you rename a station to the name of another station on the map (spaces and capitals don’t count), the editor asks whether to make the lines meet there. Join them makes the two one interchange where the other station is, keeping its details (any it doesn’t have come from the renamed one). Keep separate keeps two stations with the same name, and Cancel puts the old name back. If one line stops at both, joining them makes it a loop or a shortcut, and the question says so. Undo takes back the rename and the join together.
Interchange links
To show that people can change between two separate stations, as at two neighbouring stations on a metro map, select one and choose Join to a nearby station under Interchange links, pick the other station (the nearest are listed first) and choose Join. The two stations are shown as circles joined by a short bar, which follows them when you move either one, and the key gains a “Change between stations” row. They stay two stations. Remove, in either station’s details, takes the link away. Deleting a station removes its links. The bar and the key’s row are in every export, and the links come and go with the CSV (see CSV).
Deleting, undo and saving
Delete removes the selection. Deleting a station a line runs through asks whether to join the stations on either side or split the line in two. Deleting a line also removes the stations only it stops at.
Undo and Redo, the curved arrows (Ctrl+Z, Ctrl+Y), cover every change you make in the session. Changes save themselves; if someone else saved the map in the meantime, you are told, and Reload picks up their version.
Pan by dragging an empty part of the map, zoom with the wheel or the magnifier buttons in the map’s bottom corner, and fit the map to the window with the button below them.
Lines, steps and their details
A line’s panel has its name, short code, colour, flow (left to right, top to bottom, or loop), a description, an owner role and its stops in order. Untick Show the short code at the start and end of the line to leave the code badges off its ends. A loop has no ends, so the box is off for a loop.
A station’s panel has its name, a description, the owner role, measures (duration and unit, volume and how often, and cost in the map’s currency), notes, and the lines that stop there.
A station’s Style is how it’s drawn. Level 1 is a larger circle with a dot in the middle, Level 2 a circle with a white middle, and Level 3 a tick on the line. Left on Automatic, a station on three or more lines is level 1; one on two lines, at the start or end of a line, or on no line is level 2; any other stop in the middle of one line is level 3. The panel shows which level Automatic gives. A station on two or more lines keeps its oval shape: level 2 is hollow, level 1 adds the dot, and it can’t be a tick. If a station you made a tick later joins another line, it’s drawn as level 2 and the panel says so.
Applications and capabilities: in the map’s Settings, link it to an Application Portfolio and a Capability Modeler model. Each station can then list the applications and capabilities it uses, picked from those. You need access to the portfolio or model to link it or add from it; anyone who can open the map sees the names, types and statuses already listed. One that has since been removed is flagged as missing.
The key and zones
The key lists every line. Click a line to hide or show it; Alt-click shows only that line, and Show all brings every line back. Hidden lines are greyed in the key and left out of pictures and slides. An editor’s choice is saved with the map; a viewer’s stays on their own screen. Drag the key’s title to move it, or choose a corner in Settings.
Show zones in the toolbar (two shaded squares) shows or hides the zones. Select a zone to move it, resize it from its corners, or change its name, colour, which corner its name sits in, and description.
Pictures, slides and printing
Map → Export saves what you see, with the key and, if on, the title: SVG, PNG and JPG at 1×, 2× or 4× (PNG can have a transparent background), and PowerPoint (PPTX). The slide is made of real PowerPoint shapes, so you can change it there: each line’s tracks, stations and end badges are grouped and named after the line, so clicking a line selects all of it, and recolouring the group recolours the line. Each interchange link’s bar is a group of its own. The steps of each line are in the slide’s notes.
Map → Print prints the map alone, fitted to the page.
Viewers and read-only accounts can export and print too.
CSV
Map → Export → CSV (the whole map) saves every line, shown or not:
steps.csv has one row for each stop (so a shared step appears once per line), with
every field you can enter, including the Station style (blank for Automatic,
or 1, 2 or 3). If the map has manual routes, zones or pinned orders, they come as
tracks.csv, zones.csv and pins.csv in a zip.
Steps in order adds a Sequence column numbering each line’s steps, for analysis.
Import CSV on Maps makes a new map from those files (or the zip). Map → Import CSV in the editor brings them into the open map: lines in the files replace the lines of the same name, and other lines stay. Before anything is saved, the import checks every row and lists every problem with its row number, then shows which lines will be added, replaced and left alone. The whole import is one undo step. A file without a Station style column leaves the map’s styles as they are, and a step on more than one line can’t be given 3.
Steps without a Column and Row are placed for you; stations that have a place keep it. A step’s Follows column lists the Step IDs before it on its line, so branches and merges come through. Its Interchange links column lists the Step IDs of the steps it has an interchange link to (a link given at one end is enough). A file without that column leaves the map’s links as they are.
So that a spreadsheet never runs a cell as a formula, a cell starting with =,
+, - or @ is saved with an apostrophe in front, and import
takes it off again. Plain numbers, such as -3, are saved as they are.
Sharing, leaving and deleting
Map → Share (full access only) invites people by email as a viewer (open the map, use the key for themselves, export), an editor (change everything on the map, import CSV) or with full access (also share it, change its settings and delete it). The owner is always listed. Being in the same company gives nobody access by itself.
To delete a map, use the bin on its card on Maps, or Settings → Delete map. If someone else also has full access, you leave the map and it stays with them; otherwise it is deleted for everyone it was shared with.
A map someone shared with you as a viewer or editor has Leave on its card instead. Leaving takes away only your own access; the map stays as it is for everyone else, and the owner can share it with you again.
Map settings
Map → Settings (full access) has the map’s name, description and currency; its links to a portfolio and a capability model; and its style: grid size, track width, the gap between parallel tracks, background colour, and where the title and key go.
AI assistants
If you connect an AI assistant such as Claude to Useful EA, it can list your maps and read a map’s lines, steps and their details, to answer questions about your processes. See Connect an AI assistant for how to connect one.
It can also change maps for you, if you allow it. When you connect, tick Also let it change Metro maps you can edit; it’s a separate box from the one for Architecture Repository proposals, and it’s unticked unless you tick it. With it, the assistant can add a line from a list of steps, add a stop to a line, and change a line’s or a step’s details, on maps where you’re an editor or have full access. If you’re in a company account, the company’s AI setting must be Read and change.
Stop changes under Connected AI apps in your profile takes the permission away and keeps the assistant connected for reading. A connection made before this box existed can’t change maps: connect again and tick it if you want it to.
Still stuck? Email support@useful-ea.com.